XTM inverter

The basic functions of the combined inverters Fangpusun Xtender are the inverter, the battery charger, the switching function and the support of external sources of alternating current. These functions can be combined and controlled fully automatically. The inverters offer outstanding user-friendliness and very good exploitation of the energy available.

Product Details

Description

The basic functions of the combined inverters Fangpusun Xtender are the inverter, the battery charger, the switching function and the support of external sources of alternating current. These functions can be combined and controlled fully automatically. The inverters offer outstanding user-friendliness and very good exploitation of the energy available.

All the settings of the Fangpusun Xtender can be remote controlled. When a software with new functions is available, it can be loaded into the system, so the Fangpusun Xtender always stays up to date. Several Fangpusun Xtender can be connected in parallel or to form a three-phase system. That means that up to nine Fangpusun Xtender can work together.

Multifunction contacts

These potential-free contacts can be programmed for many different applications. They can react to any event outside or inside of the inverter (grid availability, battery voltage, fault message ...) They can also be programmed on a timer or can be switched on during particular times (at night, at the weekend ...). In this way, they can serve to start up a generator, to switch off less important loads, to signal a fault, to charge batteries depending on the situation, etc.

Smart-boost function

With the smart-boost function, the output of another source of alternating current, such as a power generator or a charger connection, can be increased; even when special loads are being used (inductive, asymmetric, with high switch-on current). It is also possible to combine the Fangpusun Xtender with almost all inverters which are already present in order to increase the available output.

Features

 

Product features

· True sine wave voltage

· Excellent overload capabilities

· Optimal battery protection

· Adjustable integrated battery charger

· Multistage programmable battery charger with PFC

· Automatic load detection

· Standby load detection adjustable over a wide range, starting from a low value

· Parallel connectable

· Best reliability

· Can be used as a back-up system or uninterruptible power supply (UPS)

· Multifunction contact

· Adjustable power sharing

· Reliable and noiseless with any kind of load

· Support of sources of alternating current (Smart Boost)

· Automatic support for peak loads (Power Shaving)

· Ultra-fast transfer relay

· High efficiency

· Control by digital signal processor (DSP)

Electronic protection functions

· Deep discharge protection

· Battery overvoltage shutdown

· Short circuit protection

· Overtemperature and overload protection

· Reverse polarity protection by internal fuse (except Fangpusun Xtender XTH 3000)

· Acoustic alarm at deep discharge or overheating

Displays

· 5 LEDs show operating states

Operation

· Main switch

· Adjustable load detection

Certificates

· Compliant with European Standards (CE)

· RoHS compliant

· Made in china


Model 

XTM 1500-12

XTM 2000-12

XTM 2400-24

XTM 3500-24

XTM 2600-48

XTM 4000-48

Characterisation of the operating performance

Nominal battery voltage

12V

12V

24V

24V

48V

48V

Input voltage range

9.5-17VDC

9.5-17VDC

19-34VDC

19-34VDC

38-68VDC

38-68VDC

Continuous power

1500VA

2000VA

2000VA

3000VA

2000VA

3500VA

Power 30 min.

1500VA

2000VA

2400VA

3500VA

2600VA

4000VA

Power 5 sec

3400VA

4800VA

6000VA

9000VA

6500VA

10500VA

Max. efficiency

93%

93%

94%

94%

96%

96%

Own consumption stand by

1.4W

1.4W

1.6W

1.6W

2.0W

2.1W

Own consumption ON

8.0W

10W

9W

12W

10W

14W

Acoustic level without ventilation

40dB

Acoustic level with ventilation

45dB

Maximum load

Up to short-circuit

Maximum asymmetric load

Up to Pcont.

Load detection(stand-by)

2 to 25W

Cos φ

0.1-1

Output voltage

Pure sine wave 130V

Output frequency

45Hz-65Hz(1)±0.05%(crystal controlled)

Harmonic distortion

<2%

Overload and short-circuit protection

Automatic disconnection with 3 time restart attempt

Overheat protection

Warning before shut-off -with automatic restart

Battery charger

Charge Characteristic

6 steps: Bulk-Absorption-Floating-Equalization-reduced fl oating-periodic absorption

Number of steps, thresholds, end current and times completely adjustable with the RCC-02/-03

Temperature compensation

With bts-01 or BSP 500/1200

Power Factor Correction(PFC) according

EN61000-3-2

Maximum charging current

70A

100A

55A

90A

30A

50A

Input voltage range

150to265vac/50to140vac(1)

Input frequency

45 to 65Hz

Input current max ( transfer relay)/

Output current max

50Aac/56Aac

Transfer time

<15ms

Multifunction contacts

2 independent contacts(potential free 3 points, 16Aac/5Adc)

Dimension hxwxl [mm]

133×322×466

Protection index

IP20

Operating temperature range

-20 to 55℃

Relative humidity in operation

95% without condensation

Ventilation

Forced from55℃

Warranty

2 years

Weight

15Kg

18.5Kg

16.2Kg

21.2Kg

16.2Kg

22.9Kg


Inquiry