The Fangpusun PA HS200 is a highly intelligent current sensor with extremely low own consumption.
The Fangpusun PA HS200 comes into play when (e.g.) an inverter is directly connected to the battery and the Fangpusun Tarcom or Power Tarcom charge controller cannot measure the current consumption. A shunt is also required when an additional generator (e.g. PV, wind ordiesel) directly charges the battery without being connected to a Fangpusun Tarcom charge controller.
The current is measured contact-free via a Hall-effect sensor.
The data is transmitted to the charge controller over a cable connection. Up to two Fangpusun PA HS200 shunts can be connected and the measured current can be selectively added to the charging current, battery current or load current as desired.
Automatic detection of voltage
Wide current measuring range
Potential free current measurement
Communicates and stores data in the Fangpusun PA Tarcom
Integrated Hall sensor
LED shows operating states
Messages via Fangpusun Tarcom LCD display
Two RJ45 cable sockets
Modes of operation
“Battery”: measures currents which flow through the battery cable
“Load”: measures currents of external loads not connectedto the charge controller
“Charge”: measures currents of back-up generators
Compliant with European Standards(CE)
Made in china
Characterisation of the operating performance
Fitting and construction
Current range “battery” mode
Current range ”charge” mode
Current range “load” mode
Degree of protection
Dimension(X x Y x Z)
Max. diameter for battery cable
Xihe Electric is one of the leading China Shunt manufacturers, our factory is able to produce cheap shunt Shunt with reliable quality. Welcome to wholesale products from us.