MPPT60 MPPT80 The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from fangpusun.The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30%compared...

Product Details


The FLEXmax family of charge controllers is the latest innovation in Maximum  Power Point Tracking (MPPT) charge controllers  from fangpusun.The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power  yield up to 30%compared to non-MPPT controllers. Thanks to active cooling and intelligent  thermal management cooling, both FLEXmax charge  controllers can operate at their full maximum current rating, 60 Amps or 80 Amps  respectively, in ambient temperatures as high as 104°F  (40°C).

Included in all of the FLEXmax Charge Controllers are the revolutionary  features first developed by fangpusun, including  support for a wide range of nominal battery voltages and the ability to step-down a higher voltage  solar array to recharge a lower voltage  battery bank. A built-in, backlit 80 character display shows the current status and logged system  performance data for the last 128 days at the touch  of a button. The integrated OutBack network communications allows FLEXmax series Charge  Controllers to be remotely programmed and monitored via  a MATE system display and provides unrivaled complete system integration.


FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile  charge controller for your advanced power system.


Product features

1.Increases PV Array Output by up to 30%

2.Advanced Continuous Maximum Power Point Tracking

3.Full Power Output in Ambient Temperatures up to 104°F (40°C)
4.Battery Voltages from 12 VDC to 60 VDC
5.Programmable Auxiliary Control Output
6.Built-in 128 days of Data Logging
7.Fully Network Integrated and Programmable

1.Text LCD display for operating parameters,fault messages,self test


1.Menu-driven operation
2.Programming by buttons


1.Compliant with European Standards(CE)
2.RoHS compliant
3.ISO 9001

4.Made in China


Nominal Battery Voltages12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)
Maximum Output Current60 amps @ 104° F (40°C) with adjustable current limit80 amps @ 104° F (40°C) with adjustable current limit
Maximum Solar Array STC Nameplate12 VDC systems 900 Watts / 24 VDC systems 1800 Watts /12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts /
48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts48 VDC systems 5000 Watts / 60 VDC Systems 7500 Watts
NEC Recommended Solar Anay STC Nameplate12 VDC systems 750 Watts / 24 VDC systems 1500 Watts /12 VDC systems 1000 Watts / 24 VDC systems 2000 Watts /
48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts48 VDC systems 4000 Watts / 60 VDC Systems 5000 Watts
PV Open Circuit Voltage (VOC)150 VDC absolute maximum coldest conditions /145 VDC start-up
and operating maximum
Standby Power ConsumptionLess than 1 Watt typical
Power Conversion Efficiency98.1% @ 60 Amps in at 48 VDC System voltage - Typical97.5% @ 60 Amps in at 48 VDC System voltage - Typical
Charging RegulationFive Stages: Bulk, Absorption, Float, Silent and Equalization
Voltage Regulation Set points10 to 80 VDC user adjustable with password protection
Equalization ChargingProgrammable Voltage Setpoint and Duration - Automatic Termination when completed
Battery Temperature CompensationAutomatic with optional RTS installed / 5.0 mV per °C per 2V battery cell
Voltage Step-Down CapabilityCan charge a lower voltage battery from a higher voltage PV array
- Max 150 VDC input
Programmable Auxilary Control Output12 VDC output signal which can be programmed for different control
applications (Maximum of 0.2 amps DC)
Status Display3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total
Remote Display and ControllerOptional Mate or Mate2 with RS232 Serial Communications Port
Network CabelingProprietary network system using RJ 45 Modular Connectors with
CAT 5e Cable (8 wires)
Data LoggingLast 128 days of Operation - Amp Hours, Watt Hours, Time in Float,
Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min
Battery Voltage and Absorb for each day along with total Accumulated
Amp Hours, and kW Hours of production
Hydro Turbine ApplicationsConsult factory for approved Turbines
Positive Ground ApplicationsRequires two Pole Breakers for switching both positive and Negative
Conductors on both Solar Array and Battery Connections (HUB-4 and
HUB-10 can not be used for use in positive ground applications)
Operating Temperature RangeMinimum -40° to maximum 60° C (Power capacity of the controller is
automatically derated when operated above 40° C)
Environmental RatingIndoor Type 1
Conduit KnockoutsOne 1" (35mm)on the back; One 1" (35mm) on the left side;
Two 1" (35mm) on the bottom
Weight - Unit5.3 kg5.6 kg
- Shipping6kg6.3 kg 
Dimensions - Unit40 x 14 x 10 cm44 x 14 x 10 cm
- Shipping46 x 30 x 20 cm51 x 24 x 21.5 cm
OptionsRemote Temperature Sensor (RTS), HUB 4,HUB 10, MATE, MATE 2
Menu LanguagesEnglish & Spanish

Xihe Electric is one of the leading China Solsum E Solar Charge Cotnroller manufacturers, our factory is able to produce cheap solsum e solar charge cotnroller Solsum E Solar Charge Cotnroller with reliable quality. Welcome to wholesale products from us.

Hot Tags: flexmax mppt MPPT Solar Charge Controller, China, manufacturers, factory, wholesale, cheap

You Might Also Like