Fangpusun Xtender XTM 1500-12, XTM 2000-12, XTM 2400-24, XTM 3500-24, XTM 2600-48, XTM4000-48, The basic functions of the combined inverters Fangpusun Xtender are the inverter, the battery charger, the switching function and the support of external sources of alternating current. These functions...
XTM 1500-12, XTM 2000-12, XTM 2400-24, XTM 3500-24, XTM 2600-48, XTM4000-48,
The basic functions of the combined inverters Fangpusun Xtender are the inverter, the battery charger, the switching function and the support of external sources of alternating current. These functions can be combined and controlled fully automatically. The inverters offer outstanding user-friendliness and very good exploitation of the energy available.
All the settings of the Fangpusun Xtender can be remote controlled. When a software with new functions is available, it can be loaded into the system, so the Fangpusun Xtender always stays up to date. Several Fangpusun Xtender can be connected in parallel or to form a three-phase
system. That means that up to nine Fangpusun Xtender can work together.
These potential-free contacts can be programmed for many different applications. They can react to any event outside or inside of the inverter (grid availability, battery voltage, fault message ...) They can also be programmed on a timer or can be switched on during particular times (at night, at the weekend ...). In this way, they can serve to start up a generator, to switch off less important loads, to signal a fault, to charge batteries depending on the situation, etc.
With the smart-boost function, the output of another source of alternating current, such as a power generator or a charger connection, can be increased; even when special loads are being used (inductive, asymmetric, with high switch-on current). It is also possible to combine the Fangpusun Xtender with almost all inverters which are already present in order to increase the available output.
True sine wave voltage Excellent overload capabilities
Optimal battery protection
Adjustable integrated battery charger
Multistage programmable battery charger with PFC
Automatic load detection
Standby load detection adjustable over a wide range, starting from a low value
Can be used as a back-up system or uninterruptible power supply (UPS)
Adjustable power sharing
Reliable and noiseless with any kind of load
Support of sources of alternating current (Smart Boost)
Automatic support for peak loads (Power Shaving)
Ultra-fast transfer relay
Control by digital signal processor (DSP)
Electronic protection functions
Deep discharge protection
Battery overvoltage shutdown
Short circuit protection
Overtemperature and overload protection
Reverse polarity protection by internal fuse (except Fangpusun Xtender XTH 3000)
Acoustic alarm at deep discharge or overheating
5 LEDs show operating states
Adjustable load detection
Type with 115 V / 60 Hz (except Fangpusun Xtender XTH 8000-48) Model with protective lacquered mainboard
Compliant with European Standards (CE)
Made in China
Remote control and display Fangpusun RCC-02 Remote control and display Fangpusun RCC-03 Fangpusun X-Connect system
Battery temperature sensor Fangpusun BTS-01
Integrated cooling unit ECF-01
Version 2018-08-13 12:56 Steca Elektronik G